The Aristotig 200/255 DC, that is based on inverter technology increases productivity and quality. The memory will hold up to four sets of welding parameters. Settings are easy to enter, are very accurate and can quickly be stored in memory.
Current pulsing in the TIG mode can be set in either micro pulse or long pulse durations. TIG striking by either LIFTARC™ or HF. The operator can choose manual or automatic arc-force. Arc-plus function software controls the MMA performance in a total new way.
Delivery includes : 5 m of mains cable, 2 m of gas hose with 2 hose clamps and I OKC cable connector and 5 m of return cable
Technical Specifications
LTN 160 DC | LTN 255 | |
Mains supply, V/Hz | 400/50-60 | 400/50-60 |
Fuse, slow, A | 10 | 10 |
Mains cable, 0 mm2 | 4x1.5 | 4x1.5 |
Max output at 35% duty cycle, A | 200 | 250 |
Max output at 60% duty cycle, A | 150 | 180 |
Max output at 100% duty cycle, A | 115 | 140 |
Slope up, s | 0-10 | 0-10 |
Slope down, s | 0-10 | 0-10 |
Gas pre-flow, s | 0-25 | 0-25 |
Gas post-flow, s | 0-25 | 0-25 |
Open circuit voltage, V | 70 | 70 |
Current range TIG DC | 3-200 | 3-250 |
Current range MMA DC | 3-200 | 3-250 |
Weight, kg | 23 | 23 |